At a glance
Distance
Elevation gain
Difficulty
Time
Trail style
Permit
Fees
Season
E-bike policy
Overview
Collier Ridge Loop is one of the Bandy Creek bike trails in the Tennessee side of Big South Fork National River & Recreation Area. It starts and finishes at the Bandy Creek Visitor Center and mixes gravel road with singletrack. The NPS describes two versions: an 8.0-mile novice loop with 4.4 miles of singletrack, and a 7.7-mile advanced loop with 5.5 miles of singletrack and a sandstone ledge drop.
- Creek crossings and sandstone slabs
- Novice bypass via Hwy 297 or advanced rock-ledge section
- Links with West Bandy (3 mi) and Duncan Hollow (5.3 mi) loops
Expect creek crossings, jumps, sandstone climbs and drops, short slalom sections through trees and fast downhill runs. Several of the park's bike trails were designed, built and are maintained by the Big South Fork Mountain Bike Club, and the Bandy Creek trails are part of the Big South Fork IMBA Epic. Collier Ridge links with the West Bandy Trail (3 mi) and the Duncan Hollow Loop (5.3 mi), so you can stretch the day from the same start.
Plan your visit
Getting there
Start at the Bandy Creek Visitor Center (nearest town: Oneida, TN). The loop follows West Bandy Creek Road to the singletrack, which turns left off the road 1.1 miles from the Visitor Center.
Parking
The NPS route starts at the Bandy Creek Visitor Center. The NPS bike page doesn't list a fee or a permit for riding.
When to go
The NPS lists no seasonal closure, so the loop can be ridden year-round. The NPS bike page doesn't publish hours.
Good to know
Bikes yield to horses on shared trails. E-bikes are allowed only on multi-use trails, public roads and parking lots. You can pick up a biking trail map at the park visitor centers.
Where to stay near Collier Ridge Loop (Big South Fork Bandy Creek bike trails)
Nearest town: Oneida, TN
Find hotels and rentals near Collier Ridge Loop (Big South Fork Bandy Creek bike trails)
We may earn a commission if you book a stay through these links, at no extra cost to you. Prices and availability come from booking partners and can change. We never rank trails by commission.
Route, step by step
- 1Visitor Center to the singletrack (0–1.1 mi): Ride West Bandy Creek Road from the Bandy Creek Visitor Center. The singletrack turns left off the road 1.1 miles out, just past the sign for Scott State Forest. Follow the bike marker posts.
- 2First split (about 0.3 mi into the singletrack): A trail splits uphill to the right. That's part of your return route.
- 3Novice or advanced (1.8 mi after leaving West Bandy Creek Road): The advanced line turns right and starts with a sandstone ledge with a steep drop, followed by steep climbs and drops, sharp turns and log crossings. Novice riders continue straight to Hwy 297, turn right, ride single file near the white line, and after 1.3 miles look for the bike marker on the right to rejoin the singletrack.
- 4Back to Bandy Creek: Once the two sections rejoin, stay on the Collier Ridge Trail for another 2.3 miles to West Bandy Creek Road, turn right and return to the Visitor Center. Or continue west along Hwy 297 to add the West Bandy Trail.
Tips
- Choose your line before the 1.8-mile split. The advanced section starts right at a sandstone ledge with a steep drop; the novice option uses Hwy 297, where you ride single file near the white line.
- Budget your time with the NPS estimates: about 1¾ hours for beginners, 1¼ hours for intermediate riders and 45 minutes for advanced riders.
- Want more miles? Add the 3-mile West Bandy Trail from Hwy 297, or ride the 5.3-mile Duncan Hollow Loop from the same Visitor Center.
- Watch for horses on shared trails and give them the right of way.
- Leave the e-bike for the roads. The NPS allows e-bikes only on multi-use trails, public roads and parking lots.
What to bring & gear
- Helmet
- Full-finger gloves and eye protection
- Water: a hydration pack or two bottles
- Spare tube, tire levers and a pump or CO2
- Multi-tool with a chain breaker
- Small first-aid kit
- Phone with an offline map
- Sun protection and insect repellent
Photos
Places to eat nearby
County's BBQ
restaurant8.9 mi away Directions
Phillips Drive In
restaurant10 mi away Directions
Gather Coffee Lounge
cafe10 mi away Directions
Big South Fork Brewing
bar10 mi away Directions
Ratings & Comments
—
No ratings yet
Sign in to rate this trail and leave a comment.
No comments yet. Share what the trail was like for you.
Nearby
More trails
Frequently asked questions
How long is the Collier Ridge Loop?
The NPS lists the novice loop at 8.0 miles with 4.4 miles of singletrack, and the advanced loop at 7.7 miles with 5.5 miles of singletrack. Both start and finish at the Bandy Creek Visitor Center.
Is Collier Ridge good for beginners?
Yes, there's a novice option. At the split 1.8 miles after you leave West Bandy Creek Road, novice riders skip the advanced section by riding Hwy 297. The NPS suggests beginners allow about 1¾ hours.
Are e-bikes allowed on the Collier Ridge Loop?
The NPS allows e-bikes only on multi-use trails, public roads and parking lots.
Is there a fee to ride at Big South Fork?
The NPS mountain bike page doesn't list a fee or a permit.
Can I make the ride longer?
Yes. Collier Ridge links with the West Bandy Trail (3 mi) and the Duncan Hollow Loop (5.3 mi) also starts at Bandy Creek.
Sources
- nps.gov — https://www.nps.gov/biso/planyourvisit/mountainbikeriding.htm
- nps.gov — https://nps.gov/biso/planyourvisit/mountainbiketrails.htm
- nps.gov — https://www.nps.gov/biso/planyourvisit/popular-mountain-biking-routes.htm
- openstreetmap.org — https://www.openstreetmap.org/node/13121679831
- bigsouthforkbike.org — https://www.bigsouthforkbike.org/BandyCreekTrails.html
- nps.gov — https://www.nps.gov/biso/planyourvisit/mountainbiketrails.htm
- nps.gov — https://www.nps.gov/biso/planyourvisit/mountainbiketrails.htm
- nps.gov — https://www.nps.gov/biso/planyourvisit/popular-mountain-biking-routes.htm
- openstreetmap.org — https://www.openstreetmap.org
